Aquascape Pond Pump Problems. Always operate the pump fully submerged. How to find a leak in your pond or waterfall.
We fix this problem usually with an exploratory pond cleaning, where we drain and clean your pond and can more easily detect where the source of a leak is. Be due to the pump’s filter cage becoming clogged with debris. Excessive backflow can cause flooding and/or damage to the pump.
We Fix This Problem Usually With An Exploratory Pond Cleaning, Where We Drain And Clean Your Pond And Can More Easily Detect Where The Source Of A Leak Is.
The rubber feet are for the prevention of sound and vibration. Sign up for local services here. 3year warranty the aquascape water pump is guaranteed for three years from the date of purchase.
If The Leak Is Not Found In These Areas, You Have A Hole In Your Stream Or Pond Liner.
Failure to do so will overheat the pump and cause it to fail, thus voiding the warranty. Use only in fully assembled state, and be sure that both the upper and lower cage screens are completely snapped together. They leak and short out.
It Is Designed For Continuous Use And Can Pump Up To 3000 Gallons Per Hour.
If your pond filter has never worked the way it should, we can help you with that as well. This could take several days. I have had to replace mine 6 times in 2 years.
Actually They Sent Me Two, One Of Them Is The Aquascape Pro Air 20W And The Other Is The Aquascape Pro Air 60.
Leave the pump off and wait until the water level stops dropping. The pump we install for you will be properly sized based on the size of your pond, the height or head of your waterfall, the size of the spillway back into the pond, and the distance and size of pipes used. Excessive backflow can cause flooding and/or damage to the pump.
Plug In The Pump At This Different Outlet.
It will typically take several months to recover the cost of the pump compared to the original savings of purchasing a less expensive sump pump, but it will then continue to pay for itself every month after with lower energy costs. Remove any debris, like rocks or sticks, which may have become lodged around and above impeller. The pump must never be operated dry without water.